Inventory -> Tube Mills -> HF/ERW ->
3" x .160" ABBEY ETNA 3XU-3.0 Tube Mill Line
Machine #2606
Machine Class: Tube Mills
Machine Type: HF/ERW
Click here to
request more
information on this machine.
Specifications
UTUBE NUMBER: 2606
MANUFACTURER: ABBEY ETNA MACHINE CO. Perrysburg, OHIO USA
MODEL NUMBER: 3XU-3.0
AGE: 1972 - 1988 - 2009
PRELIMINARY SPECIFICATIONS:
Hand of Operation: Right to Left
Maximum Tube Diameter: 3" (76.2 mm)
Minimum Tube Diameter: 1/2" (12.7 mm)
Maximum Wall Thickness: .160" (4.0 mm)
Minimum Wall Thickness: .018" (.45 mm)
Maximum Line Speed: 450 FPM (140 MPM), Max. Gear In Speed, No Load
Maximum D/T Ratio: 60:1
Minimum D/T Ratio: 10:1
Maximum Material Yield: 50,000 PSI
Gear Box Form Size: NEW, CONE 8:1 Double Enveloping Worm Gears
Drive All Shift Boxes:
Forced Lube System
Gear Ratios 1:1, 2.2:1, 3.125:1
NEW AC Motors & Drive System:
Forming Motor 100 HP 1800 RPM AC VECTOR
Sizing Motor 100 HP 1800 RPM AC VECTOR
NEW Mill Control System w/ABB Drives & Siemens PLC Controls
NEW Operator Control Station w/Complete Mill Control System
GEARBOX DATA:
Type: 3XU
Spindle Diameter: 2.5" (63.5 mm)
Roll Space, Forming: 10"
Roll Space, Fin & Sizing: 5"
Horizontal Centers Breakdown/Fin:
Horizontal Centers, Sizing:
Vertical Adjustment: "All Stands" 5-1/2" - 8-1/2"
ENTRY EQUIPMENT:
1 - 6,000 Lb. LITTELL #60-18 Double Uncoiler
1 - ABBEY ETNA Shear End Welder
1 - ABBEY ETNA Straightener
1 - KENT Floop
Model R-30
Strip Width: 1.5" - 10"
Strip Thickness: .035" - .156"
FORMING MILL:
1 - Entry Guide
3 - Driven Breakdown Stands
8 - Idle Side Rolls (Cluster Unit)
2 - Driven Fin Stands
2 - Idle Fin Stand
WELDING SECTION:
1 - THERMATOOL #TMI 200, 1991
Primary Volts: 460/30/60 Hz
Primary Amps:
Output Power: 200 Kw
Secondary Amps:
Output Frequency: 400 KHz
Complete with Heat Exchanger
1 - NEW 3-Roll Weld Pressure, Chuck Type
1 - Scarfing Stand
1 - 3-Roll Weld Planisher
COOLANT SECTION:
Flood Type, 20'
SIZING MILL:
3 - Driven Sizing Stands
3 - Idle Side Rolls
1 - ABBEY Tube Straightener, 4-Roll
1 - NEW 2-Plane, 8 Roll Squaring Turkshead
CUT-OFF:
ALPHA Flying Shear, Model #FR12-3-300:
Maximum O.D.: 3" (76.2 mm)
Minimum O.D.: .5 (12.7 mm)
Maximum Wall: .160" (4.0 mm)
Minimum Wall: .018 (.45 mm)
NEW UNIVERSAL CONTROLS, UTRAK Length Control System:
H.S. Belt Type
NEW Operator Control Desk
Runout Table: 30' Single Dump
Tooling: 1.685" Round OD
Note: This tube mill has been upgraded in 2009 with New Drives, accelerator and high speed gears for up to 400 FPM.
Click here to
request more information on this machine.
CARE IS TAKEN TO GIVE RELIABLE DESCRIPTIONS BUT THESE ARE NOT GUARANTEED.
PROSPECTIVE PURCHASERS ARE ADVISED TO CHECK VITAL DETAILS.
WE RESERVE THE RIGHT TO CORRECT STENOGRAPHIC ERRORS.
ALL MACHINERY IS SUBJECT TO PRIOR SALE.
Click Here For Conditions Of Sale
|
